Much cheaper, easy to change filters, solid construction. The Filter Slider and HyperStar adapter shown attached to a HyperStar lens and C11 EdgeHD, with an Atik 4-Series camera. Once fully inserted, the filter holder is held in place securely and precisely. The body has female M48 threads on the HyperStar side and male T-threads on the camera side. Add to Cart
Please,
Additional drawers can be purchased separately to hold multiple filters such as an LRGB set or narrowband set. Only registered users can write reviews. Specifications Male M48x0.6 Filter Slider threads (0.125" long) So right now, I am screwing 2 filters into the WO adjustable flattener, but this is not a very convenient solution. It steps the M48 threads of a standard 2" filter down to the 1.125" threads of a standard 1.25" filter. The magnets are strong enough to prevent any slipping but allow for easy removal of the holder when it's time to change filters.The Filter Slider is only 17.5mm (0.69") thick, so it will work with most CCD camera and HyperStar lens combinations. The Filter Slider and HyperStar adapter shown attached to a HyperStar lens and C11 EdgeHD, with an Atik 4-Series camera.
The filter holder slides easily into the main body. How to install By removing the original faceplate or tip-tilt adapter on the RedCat / SpaceCat you can thread this adapter directly to the scope giving you the correct threads and backfocus to use a Starizona Filter Slider and your DSLR w/ 55mm of backfocus. See FAQs for more info.We do not normally keep this in stock, but can get it for you as soon as the manufacturer allows. The body has female M48 threads on the HyperStar side and male T-threads on the camera side. More Included is one standard filter slider body, two drawers, and a keeper for the drawer that's not currently in use. We are experiencing some delays. Our new Filter Slider allows for easy exchange of different filters without removing the camera from the HyperStar lens. You have no items in your shopping cart. The body of the filter slider is small enough in diameter that it adds no significant obstruction to the telescope, even with an 8" HyperStar. It is unique in that it is perfectly circular and has no handles or other protrusions that would interfer with the path of the light. !Got this instead of a filter wheel. is unique by being perfectly circular with no handles or other protrusions that could interfere with the light path.
It is zero profile, adding no extra height to the 1.25" filter. This Starizona Filter Slider makes it easy to change filters without removing the camera from the HyperStar lens. If so, is it light tight? Holds standard 2" mounted filters (M48 thread) Telescope Side Thread…
This filter step ring is made specifically with the Starizona Filter Slider system in mind. The filter holder slides easily in and out of the filter slider body, making it simple to change filters in the middle of an imaging session. New HyperStar adapters are available (see links below) that are shorter in length to accomodate the thickness of the Filter Slider.The standard system is designed to hold 2" mounted filters which have a standard 48mm thread*. The Starizona Filter Slider is designed to be simple to use. Starizona Filter Slider - Complete System Tapered edges guide the filter holder into place for easy switching of filters in the dark. The standard system is designed to hold 2" mounted filters which have a standard 48mm thread*. The filter holder slides easily in and out of the filter slider body, making it simple to change filters in the middle of an imaging session. The body of the filter slider is small enough in diameter that it adds no significant obstruction to the telescope, even with an 8" HyperStar. Starizona Filter Slider - M48 Thread The Starizona Filter Slider is unique by being perfectly circular with no handles or other protrusions that could interfere with the light path. Most filter wheels are too large to use with HyperStar because they block so much of the telescope aperture.
The magnets are strong enough to prevent any slipping but allow for easy removal of the holder when it's time to change filters.The Filter Slider is only 17.5mm (0.69") thick, so it will work with most CCD camera and HyperStar lens combinations.
The body has female M48 threads on the HyperStar side and male T-threads on the camera side.One filter holder is included with the Filter Slider. New HyperStar adapters are available (see links below) that are shorter in length to accommodate the thickness of the Filter Slider.Your input is very much appreciated. Share it with your friends so they can enjoy it too!Amazingly simple and well made, should have had one years ago! Add to Cart Each holder uses small but powerful magnets to lock in place against matching magnets in the main body. Use this adapter to attach a Starizona Filter Slider to a 2" focuser, such as for use with a refractor or Newtonian telescope. I tried another manufacturers filter slider, with magnetic closure, and the light leakage was terrible. ZWO Filter slider M42-M48 - posted in Equipment: Has anyone used this product? Each holder uses small but powerful magnets to lock in place against matching magnets in the main body. The standard system is designed to hold 2" mounted filters which have a standard 48mm thread*.